Valuetrex

Valuetrex - VX Series - 10" x 4.5" Poly Spun Filter - Sediment Cartridge

Product Code 1227865-V-BB (VX01-10"BB)

$25.80

Valuetrex VX Series

10" x 4.5" Poly Spun Sediment Filter

Four-layer meltblown polypropylene cartridge engineered for whole-house, well, and commercial applications. Available in 1, 5, 10, and 25 micron ratings.

NSF/ANSI 42 FDA CFR Title 21 7-10 GPM
WHY IT WORKS

Four-layer construction for sustained sediment removal

πŸ”¬

Gradient density filtration

Four-layer meltblown polypropylene structure captures sediment progressively from outer to inner layers, extending service life and preventing premature pressure drop.

πŸ›‘οΈ

UV pre-filtration essential

Removes particulate that allows bacteria to shield from UV exposure. Without sediment pre-filtration, contaminants piggyback through UV chambers unaffected.

πŸ’§

Municipal and well rated

Handles sand, silt, rust, and scale from both chlorinated city water and untreated well sources. Temperature rated from 40Β°F to 145Β°F for diverse installations.

βš™οΈ

Industry standard sizing

9-7/8" length, 4.5" outer diameter, 1-7/64" inner diameter. Fits standard 10" x 4.5" housings from most manufacturers without adapter required.

SPECIFICATIONS

Valuetrex VX Series technical data

Dimensions 9-7/8" x 4.5" OD (1-7/64" ID)
Filter media Polypropylene meltblown (4-layer)
Micron options 1, 5, 10, 25 micron
Flow rate 7-10 gallons per minute
Temperature range 40Β°F to 145Β°F (4.4Β°C to 62.8Β°C)
Certifications NSF/ANSI 42, FDA CFR Title 21
Applications Whole-house, well, commercial, RO pre-filtration, UV pre-filtration
COMPATIBILITY

Fits standard 10" x 4.5" housings

The Valuetrex VX Series cartridge is compatible with any filter housing designed for 10-inch by 4.5-inch sediment filters, including whole-house systems, well water treatment assemblies, and commercial pre-filtration stages. Commonly used upstream of reverse osmosis membranes, UV sterilizers, carbon block filters, and water softeners.

MAINTENANCE

Replacement schedule by application

3-6 months

Well water systems

Higher sediment loads from untreated sources require more frequent changes. Monitor pressure drop across housing.

6-9 months

Municipal whole-house

Pre-treated city water extends cartridge life. Replace when flow rate decreases noticeably or pressure gauge indicates restriction.

4-6 months

RO and UV pre-filtration

Critical protection stage for downstream components. Replace on schedule to prevent membrane fouling or UV shadowing.

As needed

Commercial applications

High-volume usage may require monthly inspection. Install pressure gauges before and after housing to track differential.

πŸ“¦

Standard fitment

Drop-in replacement for most 10" x 4.5" sediment cartridges without modification

πŸ”„

Four micron options

Choose 1, 5, 10, or 25 micron based on sediment size and downstream equipment requirements

βœ“

NSF certified materials

Polypropylene construction meets NSF/ANSI 42 and FDA standards for potable water contact

⚑

High flow capacity

7-10 GPM rating supports whole-house demand without restricting pressure at fixtures