PureT - SC Signature Series - 10" x 2.5" Spun Polypropylene Sediment Filter
10" x 2.5" Spun Polypropylene Sediment Filter
Three-layer meltblown polypropylene in a coreless construction
Coreless Design
No center core means maximum surface area and longer filter life in standard 10" housings
Three-Layer Structure
Progressive density meltblown polypropylene captures sediment from coarse to fine throughout the filter depth
Multi-Micron Range
Available in 1, 5, 10, and 20 micron ratings to match your water quality and application requirements
Dual Certification
NSF 42 and FDA CFR Title 21 certified for use in drinking water, food service, and beverage applications
PureT SC Signature Series Filter Details
| Dimensions | 10" x 2.5" |
| Filter Type | Spun Polypropylene (Meltblown) |
| Construction | Coreless, 3-layer nominal rating |
| Micron Options | 1, 5, 10, 20 micron |
| Certifications | NSF 42, FDA CFR Title 21 |
| Removes | Sediment, sand, silt, rust, scale particles |
Where this filter fits
The PureT SC Signature Series 10" x 2.5" sediment filter fits all standard 10-inch filter housings with 2.5" diameter capacity. Commonly used as pre-filtration in reverse osmosis systems, whole-house water filters, and post-filtration after granular activated carbon (GAC) filters. Also compatible with commercial applications including ice machines, film processing equipment, beverage dispensers, coffee brewers, analytical lab systems, and winery filtration setups. Suitable for both municipal water and well water sources.
Replacement schedule by application
RO Pre-Filtration
Replace every 3 to 6 months depending on sediment load to protect membrane life
Whole-House Systems
Replace every 6 to 12 months based on water usage and sediment levels in municipal or well water
Commercial Use
Ice machines, coffee equipment, and beverage systems typically require replacement every 3 to 6 months under normal use
Pressure Drop Method
Monitor pressure gauge and replace when pressure drop exceeds 10-15 PSI from baseline
Economical
Affordable coreless design without sacrificing filtration performance
Lightweight
Easy to handle and replace in residential and commercial housings
Universal Fit
Standard 10" x 2.5" size fits virtually all compatible filter housings
Certified Safe
NSF and FDA approved for potable water and food contact applications
