PureT
PureT (CB-MPC6) Compatible CB6 Carbon Filter
$34.50
The PureT CB-MPC6 compatible carbon block filter delivers high-purity coconut shell carbon filtration with excellent chlorine reduction and dirt-holding capacity. Engineered to provide superior cost-to-performance value with minimal carbon fines, this CB6 series filter is built for reliable, long-term water treatment applications.
SPECIFICATIONS
CB-MPC6 Technical Details
| Model Number | CB-MPC6 |
| Manufacturer | PureT |
| Filter Media | High-purity coconut shell carbon |
| Filter Type | Carbon block |
| Compatible Series | CB6 series housings |
| Primary Function | Chlorine reduction, taste and odor improvement |
| Configuration | Available in multiple lengths, diameters, and micron ratings |
| Connection Type | NPT threaded (sizing reference below) |
INSTALLATION & USE
Filter Replacement Process
- Turn off water supply and relieve system pressure before removing existing filter cartridge from housing
- Clean the filter housing interior with mild soap and water, then rinse thoroughly to remove any sediment or carbon fines
- Insert the new PureT CB-MPC6 carbon block filter into the housing, ensuring proper seal and alignment with NPT connections
- Reassemble housing and turn on water supply, checking for leaks at all connection points
- Flush the new carbon filter for 5 minutes to remove any initial carbon fines and activate full filtration performance
COMPATIBILITY
NPT Sizing Reference
National Pipe Thread (NPT) sizing does not correspond to ruler measurements. A 1/4" NPT fitting measures 0.540 inches in actual diameter, not 0.25 inches. Reference guide: 1/8" NPT = 0.405" actual, 1/4" NPT = 0.540" actual, 3/8" NPT = 0.675" actual, 1/2" NPT = 0.840" actual. The CB-MPC6 is compatible with standard CB6 series filter housings and systems requiring coconut shell carbon block filtration.
🔧 Pro tip: Always measure NPT fittings with calipers rather than relying on fractional names. The actual diameter will be significantly larger than the NPT designation, which prevents costly ordering mistakes when matching filters to housings.
