Omnipure Q5605 and (2) Q5633 Replacement Sediment Carbon Filter Cartridge Set
This three-cartridge replacement set combines one Omnipure Q5605 sediment filter with two Q5633 carbon block filters to deliver multi-stage water treatment. The configuration provides initial sediment removal followed by dual carbon filtration for comprehensive contaminant reduction in point-of-use and whole-home systems.
Three-Stage Filtration Process
Omnipure Q5605 Pre-Filter
Captures sediment, rust, and particulate matter down to 5 microns, protecting downstream carbon filters from premature fouling and extending their service life.
Replace every 6-12 monthsFirst Q5633 Carbon Block Stage
Solid carbon block media reduces chlorine, chloramines, VOCs, and organic chemicals while maintaining consistent flow rate through high-density compression.
Replace every 6-12 monthsSecond Q5633 Carbon Block Stage
Final carbon polishing stage removes residual taste, odor, and chemical contaminants, delivering clean water with improved clarity and palatability.
Replace every 6-12 monthsSystem Requirements
All three cartridges feature standard 10-inch length with quick-change design compatible with Omnipure Q-Series filter housings and most standard 10-inch filter heads. The Q5605 sediment filter uses spun polypropylene construction, while both Q5633 carbon blocks utilize coconut shell activated carbon compressed into solid form. Verify housing specifications accommodate 2.5-inch to 2.75-inch diameter cartridges before installation. This set is designed for systems requiring three-stage sediment and dual carbon filtration in residential, light commercial, or food service applications.
