The Omnipure ELF 1M-SILVER is a 12.5" x 4" carbon block filter engineered with silver-impregnated media to inhibit bacterial growth while delivering 1-micron filtration. This specialty filter combines chlorine reduction, taste and odor improvement, and cyst removal in a single cartridge designed for demanding residential and commercial applications.
SPECIFICATIONS
Omnipure ELF 1M-SILVER Technical Details
| Model Number | ELF 1M-SILVER |
| Dimensions | 12.5" length x 4" diameter |
| Filter Type | Carbon block with silver impregnation |
| Micron Rating | 1 micron (nominal) |
| Primary Filtration | Chlorine, taste, odor, cyst reduction |
| Special Feature | Silver-impregnated media for microorganism inhibition |
| Series | Omnipure E-Series ELF |
| Application | RO systems, specialty filtration, point-of-use |
INSTALLATION & USE
Filter Replacement Procedure
- Shut off water supply and relieve system pressure by opening the dispensing faucet
- Remove the filter housing, discard the old filter, and clean the housing interior with mild soap and water
- Install the Omnipure ELF 1M-SILVER into the housing, ensuring proper seating and o-ring alignment
- Reassemble the housing, turn on water supply, and flush the new filter for 3-5 minutes before use
COMPATIBILITY
System Compatibility
The ELF 1M-SILVER is designed for proprietary Omnipure housings that accommodate 12.5" x 4" diameter cartridges. This filter is commonly used in reverse osmosis systems as a pre-filter or post-filter stage, under-sink drinking water systems, and commercial applications requiring both particulate removal and bacteriostatic protection. Verify your housing dimensions before ordering, as the 4-inch diameter is larger than standard 10" x 2.5" or 2.75" cartridges.
🔧 Pro Tip: The silver impregnation in this filter helps prevent bacterial colonization during storage and standby periods, making it ideal for vacation homes or low-usage applications where water sits in the lines for extended periods.
