- $10.99 flat-rate shipping Β· FREE on orders $75+ (continental US)
- Ships within 2 business days from Santa Ana, CA
- 30-day returns on stock items
- Not sure it fits? Call (714) 541-6600
Compatibility
| Fits these systems |
|
|---|---|
| Replaces part numbers |
|
Not sure it fits? Call (714) 541-6600 Β· Aftermarket compatible replacement; brand names and part numbers are for reference only.
Complete Filter Set Details
| Model Number | FS-5B |
| Compatibility | Pure Water Club 6-Stage RO DI Systems |
| Filter Dimensions | 10 inch standard cartridge size |
| Sediment Pre-Filter | 5 micron polypropylene (1 pc) |
| Carbon Block Pre-Filters | 5 micron coconut carbon block (2 pcs) |
| DI Filter Resin Load | 6 oz pre-loaded ion exchange resin (1 pc) |
| Post-Filter | In-line granular activated carbon (1 pc) |
| Replacement Cycle | 6-12 months depending on water quality |
Filter Replacement Procedure
- Shut off feed water supply and relieve system pressure by opening the dispensing faucet until water stops flowing
- Remove filter housings using a housing wrench and discard old cartridges, then clean housings with mild soap and rinse thoroughly
- Install new filters in correct order: sediment first, followed by both carbon blocks, then DI filter, and finally the inline GAC post-filter
- Hand-tighten housings with lubricated o-rings, turn on water supply slowly, and check all connections for leaks
- Flush system for 5-10 minutes before use to remove carbon fines and activate the DI resin bed
System Requirements
This FS-5B filter set is manufactured by IPW Industries Inc as a compatible replacement for Pure Water Club branded 6-stage reverse osmosis deionization systems. All cartridges use standard 10 inch housing dimensions with 2.5 inch outer diameter. The DI filter requires a system designed to accommodate resin-based polishing cartridges. Not compatible with systems using proprietary quick-connect housings or non-standard filter lengths. Verify your existing system uses 10 inch cartridge housings before ordering.