Hydronix SDC Series Filter Specs
Material & Performance Data
| Filter Media | 100% pure polypropylene melt blown microfiber |
| Core & End Caps | Polypropylene, molded construction |
| Max Pressure Drop | 30 PSI at rated flow |
| Flow Rate | Varies by micron rating and inlet water quality |
| Chemical Resistance | Compatible with chlorinated water and most chemicals |
| Certification | NSF/ANSI standards for material safety |
| Service Life | 3-6 months typical, depends on sediment load |
Where This Filter Works Best
The Hydronix SDC Series fits any standard 10" x 2.5" filter housing and is commonly used as stage 1 pre-filtration in reverse osmosis systems, protecting membranes from sediment damage. It also functions effectively in whole-house water filter systems to remove sand, silt, rust, and scale particles. Available in 1, 5, and 20 micron ratings to match your water quality and filtration requirements. Choose 20 micron for heavy sediment loads, 5 micron for general residential use, or 1 micron for polishing applications or post-GAC filtration.

