Fleck

Fleck (61454-4) Injector #4 Green for 7000 SXT for 21" diameter tanks

Product Code 61454-4

$27.14

The Fleck 61454-4 Green Injector #4 is engineered specifically for 7000 SXT control valves paired with 21-inch diameter softener tanks. This precision-molded component ensures proper brine draw and regeneration flow rates for medium-capacity residential water softening systems.
SPECIFICATIONS

Technical Details

Manufacturer Fleck
Part Number 61454-4
Injector Size #4 (Green)
Compatible Valve Fleck 7000 SXT
Tank Diameter 21 inches
Material Chemical-resistant polymer
Function Brine draw and backwash flow control
Color Code Green
INSTALLATION & USE

Replacement Procedure

  1. Relieve system pressure and initiate a manual backwash cycle to clear the valve body
  2. Remove the injector cap from the control valve and extract the old injector assembly using needle-nose pliers
  3. Insert the new green #4 injector into the throat, ensuring the o-ring seats properly in the valve body
  4. Hand-tighten the injector cap and run a complete regeneration cycle to verify proper brine draw
COMPATIBILITY

System Requirements

This green #4 injector is sized exclusively for Fleck 7000 SXT control valves installed on 21-inch diameter mineral tanks. Using the incorrect injector size will result in improper brine draw, incomplete regeneration, and reduced softening capacity. Fleck color-codes injectors to match specific tank diametersβ€”always verify your tank size before ordering. The 7000 SXT valve is commonly found in residential systems with 1.0 to 1.5 cubic feet of resin.

πŸ”§ Pro Tip: Keep a spare injector on handβ€”they're inexpensive insurance against downtime. If your system stops drawing brine or regeneration times seem off, the injector throat may be clogged with iron or sediment. A quick injector swap is often faster than attempting to clean a fouled unit.