Fleck 5600 SXT 5-Cycle Metered Softener Control Valve — 24V, #1 Injector (Valve Only)
Fleck 5600 SXT 5 Cycle, Softener Meter Valve, 24 Volts, #1 Injector - Isopure Water - 560006 - 02
Load image into Gallery viewer, Fleck 5600 SXT 5-Cycle Metered Softener Control Valve — 24V, #1 Injector (Valve Only)
Load image into Gallery viewer, Fleck 5600 SXT 5 Cycle, Softener Meter Valve, 24 Volts, #1 Injector - Isopure Water - 560006 - 02
Fleck

Fleck 5600 SXT 5-Cycle Metered Softener Control Valve — 24V, #1 Injector (Valve Only)

Product Code 560006-02

$575.00

This is the control valve only. The Fleck 5600 SXT is the metered valve head that mounts on top of a softener tank — it is not a complete, ready-to-run water softener.

✓ Included

Fleck 5600 SXT valve head, 24V transformer, and #1 injector / 1600 brine system. Choose the drain line flow control (DLFC) button for your tank size from the options above, or select "No DLFC" if you already have one.

✕ Not included

Resin (mineral) tank, softening resin, brine/salt tank, bypass valve, and distributor tube — you'll need these to build a working softener.

💧Not sure which parts you need? Call us at 714-541-6600 and we'll spec the complete system for your tank size and water hardness.

The Fleck 5600 SXT is a digitally metered water softener control valve engineered for on-demand regeneration, reducing salt and water waste while maintaining consistent soft water delivery. This 24-volt, 5-cycle valve features a non-corrosive fiber-reinforced polymer body, handles flow rates up to 26 GPM peak, and offers both down-flow and up-flow regeneration configurations for maximum installation flexibility.
SPECIFICATIONS

Key Performance Metrics

Flow Capacity
26 GPM
Peak at 25 psi drop
Meter Range
125–10,625 gal
Standard & extended capacity
Port Sizes
3/4", 1", 1-1/4"
Inlet/outlet options
Regeneration
Down/Up Flow
Both configurations supported
Operating Pressure
20–125 psi
300 psi hydrostatic rated
Power
24V DC
110V 60Hz transformer included
TECHNICAL DETAILS

Valve Construction & Electrical

Valve Body Material UV-resistant fiber-reinforced polymer
Injector System #1 Injector, 1600 brine system (removable from exterior)
Regeneration Cycles 5 cycles with double backwash, 180 minutes total time available
Meter Accuracy ±5% accuracy between 0.25–15 GPM flow rates
Drain Line Connection 1/2" NPTF (DLFC not included, see compatibility notes)
Brine Line Connection 3/8" (1600 series)
Temperature Range 34–110°F operating temperature
COMPATIBILITY & APPLICATIONS

Installation Requirements

The Fleck 5600 SXT 24V valve mounts to any 2-1/2" - 8 NPSM threaded tank with a 1.050" distributor tube and sits 7" above the tank top. This model ships without a Drain Line Flow Control (DLFC) button, which must be selected based on tank size: use 1.2 GPM for 8"×44" tanks, 1.5–2.0 GPM for 9"×48" systems, 2.4 GPM for 10"×54", 3.0 GPM for 12"×52", and 3.5–5.0 GPM for larger 13"×54" to 14"×65" vessels. The modular injector/drain assembly allows for quick servicing without removing the valve from the tank. Annual power consumption is minimal thanks to the single-motor design that handles both timekeeping and valve actuation. Replacement part number 94SV-56SXM24V.

💧 Pro Tip: The removable injector module on the 5600 SXT means you can replace or clean the #1 injector, brine valve, and flow controls without breaking any plumbing connections—a major advantage during maintenance or troubleshooting.