These melt-blown polypropylene sediment filters are designed specifically for the Viqua IHS12-D4 UV system and standard 10 x 4.5-inch housings. Each filter reduces dirt, rust, and sediment down to 5 microns to protect your UV system and improve water clarity.
SPECIFICATIONS
CMB-510-HF Compatible Filter Technical Details
| Model Compatibility | CMB-510-HF, Viqua IHS12-D4 UV System |
| Filter Dimensions | 10 x 4.5 inches |
| Filtration Rating | 5 micron sediment reduction |
| Filter Media | 100% melt-blown polypropylene |
| Contaminants Reduced | Dirt, sediment, rust, particulates |
| Replacement Frequency | Every 3-4 months |
| Package Quantity | 2 filters per pack |
| Construction | Surfactant-free, binder-free, adhesive-free |
INSTALLATION & USE
Filter Replacement Process
- Turn off water supply and relieve pressure by opening a downstream faucet
- Unscrew filter housing using a filter wrench, remove old cartridge, and clean housing with mild soap
- Insert new CMB-510-HF compatible filter, ensuring proper seal, and hand-tighten housing back into place
- Turn water supply back on slowly and check for leaks around the housing o-ring
- Flush filter by running cold water for 3-5 minutes before resuming normal use
COMPATIBILITY
Compatible Systems and Housings
This filter is designed as a compatible replacement for the CMB-510-HF and fits the Viqua IHS12-D4 water disinfection system. It works with any standard 10 x 4.5-inch whole house filter housing. The melt-blown polypropylene construction provides effective sediment filtration upstream of UV systems, protecting the quartz sleeve and maximizing UV transmission for proper disinfection.
🔧 Pro Tip: Pre-filtration with a 5 micron sediment filter is essential for UV systems like the IHS12-D4. Sediment buildup on the quartz sleeve reduces UV effectiveness and can allow bacteria to pass through untreated. Replace these filters every 3-4 months or sooner if you notice pressure drop or cloudy water.
