Omnipure - K2548 - 10" x 2" Remineralization Filters - Calcite Inline Filter

The K2548 inline calcite filter is one of Omnipure's K series inline filters that easily install directly to your water line and reduce weeping or seepage potential. This filter contains calcite, a crushed and screened white marble media, to neutralize acidic or low pH waters to a safer, less corrosive effluent. Available with various fittings to meet your water line's specifications.

NOTE: 1/4" and 3/8" refers to the outside diameter of tubing.

Specifications:

• Dimensions: 10" X 2"
• Replace every 6-12 months
• Corrects acidic/low pH water
• Available Fittings:
• BB = 1/4" FPT
• CC = 3/8" FPT
• JJ = 1/4" Quick Connect
• KK = 3/8" Quick Connect

National Pipe Thread (NPT) Size Measured Against a Ruler*
Actual Diameter (Inches)	National Pipe Thread (NPT) (Fractional)
0.405"	1/8"
0.540"	1/4"
0.675"	3/8"
0.840"	1/2"

*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case.  NPT will measure larger in diameter.  Above is a sizing reference to help clarify.