ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Omnipure

Omnipure - K2333 - 6" x 2" T40 GAC Coconut Carbon Inline Filter

Product Code K2333-BB

$9.50
per 

The Omnipure K-Series K2333 filters feature 1/4" and 3/8" Quick-Connect fittings that make this filter really easy to install and replace. It can be used in refrigerators, ice makers, any reverse osmosis system and many under-counter water filtration systems. It also helps remove chlorine taste and odor, and taste and odor in the water.

  • Dimensions: 2" W X 6" L
  • Flow Rate: .5 GPM
  • Maximum Pressure: 125 PSIG
  • Maximum Temperature: 100 F
  • Service Life: 1 Year or 1000 Gallons
  • Filtration Media: Granulated Activated Carbon
  • Volume Cubic Inch: 9.5
  • Reduces: Chlorine Taste & Odor
  • Fitting Size: Quick-Connect 1/4" and 3/8" fittings
  • Omnipure K2340 has been tested for performance under NSF Standard 42.

**Interchangeable carbon with T28, T33 and T40 models.

National Pipe Thread (NPT) Size Measured Against a Ruler*
 Actual Diameter
(Inches)
National Pipe Thread (NPT)
(Fractional)
0.405" 1/8"
0.540" 1/4"
0.675" 3/8"
0.840" 1/2"

*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case.  NPT will measure larger in diameter.  Above is a sizing reference to help clarify.