Male Connectors with Ferrule Nut with integral sleeve low pressure applications soft plastic tubing 50 PSI

Nylon is resistant to organic solvents, oils & gasoline; also resistant to impact & weather
Nylon pressure: 1/8"-1/2" 50 psi
Temperature range: -40°F to 200°F
Nylon meet FDA standards & are NSF listed

National Pipe Thread (NPT) Size Measured Against a Ruler*
Actual Diameter (Inches)	National Pipe Thread (NPT) (Fractional)
0.405"	1/8"
0.540"	1/4"
0.675"	3/8"
0.840"	1/2"

*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.

** For high pressure needs, add a gripper to increase pressure grip to 220 PSI

Top Sellers

Jaco - Male Connector Fitting with Ferrule Nut and Integral Sleeve - Nylon

Jaco - Reducing Union Fitting with Ferrule Nut and Integral Sleeve - Nylon