The Omnipure ELF BRACKET is a universal wall-mount bracket designed to securely install Omnipure E-Series, ELF-Series, and Q-Series filter housings with or without valve heads. This essential mounting hardware includes screws and provides a stable, space-saving solution for under-sink or point-of-use filtration installations.
SPECIFICATIONS
Bracket Details
| Manufacturer | Omnipure |
| Model | ELF BRACKET |
| Compatible Series | E-Series, ELF-Series, Q-Series |
| Mount Type | Wall Mount |
| Compatible Heads | Valve Heads and Non-Valve Heads |
| Hardware Included | Mounting Screws |
| Material | Durable Plastic |
| Application | Point-of-Use, Under-Sink |
INSTALLATION & USE
Mounting Your Omnipure Filter
- Identify a secure mounting location on a vertical surface where the filter housing will have adequate clearance for cartridge replacement.
- Position the ELF BRACKET against the wall and mark the screw holes with a pencil.
- Drill pilot holes if installing into drywall or wood, then secure the bracket using the included screws.
- Slide the Omnipure filter housing head into the bracket slot until it clicks securely into place.
- Verify the filter housing is stable and properly seated before connecting water lines.
COMPATIBILITY
Works With
This bracket is compatible with all Omnipure E-Series, ELF-Series, and Q-Series filter housings, including models with integrated valve heads and standard non-valve head configurations. It provides universal support for the full range of Omnipure inline filter cartridges in these series, making it ideal for replacement installations or new point-of-use filtration projects.
🔧 Pro Tip: Mount the bracket high enough to allow the filter cartridge to swing out freely when unscrewing the housing sump. Leave at least 12 inches of clearance below the filter for easy cartridge changes without having to disconnect water lines.
