Intelifil (IF-SM-AA010B) 10"X4.5" Big Blue Activated Alumina Fluoride Removal FilterSKU: IF-SM-AA010B
Highly Fluorinated water may be dangerous to your health. Drinking water with fluoride levels above 2 mg/L can lead to mottling of the teeth. Ongoing levels above 4 mg/L can result in serious health problems.
Although the main purpose of this filter is to remove fluoride, Activated Alumina can remove many other contaminants.
- Hydrogen Chloride
- Hydrogen Sulfide
- Carbonyl Sulfide
- Carbon Dioxide
- Inorganic Arsenic
- Dimensions: 10" x 4.5"
- Design Flow Rate: .25 GPM
- Weight: 4 lbs 4 oz
- Operation Temperature: 40°F to 100°F
- Filter Media: Activated Alumina
- Filter Life: 11,000 mg/L or 640 GPG
For maximum effectiveness, do not exceed the recommended flow rate of .25 GPM. This filter lasts for 11,000 mg/l (ppm) with effluent levels below 0.2 ppm from 10 ppm feed (approximately 2750 gallons). Note: high pH and high bicarbonate levels reduce the capacity - above 100 ppm bicarbonate, reduce by 50%; above 200 ppm, reduce by 75%.
Interfering ions and the recommended flow rates must be specifically accounted for when sizing these cartridges.