Activated Carbon Refrigerator Water Filter Compatible with for GE RPWFE, RPWF Refrigerator Water Filter without Chip（1-5Packs)
Tested and verified to filter 5 trace pharmaceuticals including ibuprofen, progesterone, atenolol, trimethoprim, and fluoxetine ( The contaminants or other substances removed or reduced by this water filter are not necessarily in all users' water)
Certified to reduce chlorine-resistant cysts, lead, select pharmaceuticals and 50 other contaminants. Reduces 99% of Perfluorooctanoic acid (PFOA) and Perfluorooctaine Sulfonate (PFOS)
Six-Month filter life: For best filtration results, filter cartridge should be replaced every six months or 300 gallons.
It works with any refrigerator that currently uses GE RPWF, It is compatible with most old GE French door refrigerators without touch screens.
Note: This water filter without RFID chip.
This water filter without RFID chip.
This water filter without RFID chip.
If your refrigerator is a relatively new refrigerator with touch screen and intelligent recognition, we do not recommend you to buy it. If you think GE's water filter is too expensive, insist on purchasing our after-sales water filter. Please leave a message to us and we will provide solutions for your reference
If you want to solve it, please take a look here
1-Locate the 'Blank' filter by-pass plastic piece sent with your GE Profile Series refrigerator (found this from another reviewer noting there was an RFDI tag on the back of the by-pass).
2-Locate the label "BACK This side must face inward" and peel it off. (see the picture)
3-Remove the RFID tag under the label.
4-Open the water filter housing cover inside the refrigerator.
5-Place the RFID tag over the 'FCC' label on the back inside the filter housing near the screw, hold in place by re-using the label you peeled off the 'Blank' filter by-pass. (see picture)NOW you can install ANY water filter compatible with GE RPWF (NOT 'E'), saving from $20 to $30+ each!!--NOTE: 1-This fix will turn OFF the countdown feature but WILL leave ON the Oz. fill and 'Auto-Fill' features. 2-The front panel will now show "NOT FILTERING" when you fill a container with water or ice (even though you installed a new filter). This additional insult to the CUSTOMER can be simply overridden by: A) Removing the two screws (inside the upper opening of the dispenser in the door) holding the display on the door. B) Removing the circuit board connectors C) Removing the Torx screws holding the circuit board to the display. D) Placing a small rectangular piece of black tape over the "NOT" word on the display. (See Picture) E) Reassemble.This 15 minute 'Scam Work Around' will save you from $20 to $30+ each time you replace the filter
