Male Connectors with Ferrule Nut with integral sleeve low pressure applications soft plastic tubing 50 PSI

Kynar^® is resistant to highly corrosive fluids & UV
Use Kynar^® fittings with Kynar^®, PTFE, FEP & PFA tubing
Kynar^® Pressure: 1/8" 50 psi; 1/4" & up 220 psi
Temperature range: -80°F to 275°F (Kynar^®)
Kynar^® meet FDA standards & are NSF listed
Polypropylene is NSF 61 listed

National Pipe Thread (NPT) Size Measured Against a Ruler*
Actual Diameter (Inches)	National Pipe Thread (NPT) (Fractional)
0.405"	1/8"
0.540"	1/4"
0.675"	3/8"
0.840"	1/2"

*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.

** For high pressure needs, add a gripper to increase pressure grip to 220 PSI

Top Sellers

Jaco - Male Connector Fitting with Ferrule Nut and Integral Sleeve - Kynar