ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Omnipure

Omnipure - K2585 - 10" x 2" ALL Phosphate - Scale Inhibitor Inline Filter

Product Code K2585-BB

$30.00
per 
Shipping calculated at checkout.

The Omnipure K-Series K2585 inline filter is an All phosphate inline filter. This filter can go in ice makers, refrigerators, beverage equipment, drinking fountains, under the counter systems, R.O.Systems and in conjunction with purification systems. This type of filter is used for scale and corrosion inhibition. 
  • Dimensions: 2" W X 10" L
  • Flow Rate: .5 GPM
  • Maximum Pressure: 125 PSI
  • Maximum Temperature: 100 F
  • Service Life: 6 Months
  • Filtration Media: Polyphosphate - Scale Inhibitor
National Pipe Thread (NPT) Size Measured Against a Ruler*
 Actual Diameter
(Inches)
National Pipe Thread (NPT)
(Fractional)
0.405" 1/8"
0.540" 1/4"
0.675" 3/8"
0.840" 1/2"
*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case.  NPT will measure larger in diameter.  Above is a sizing reference to help clarify.