ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Filtrex

KX Technologies - FXCUL12CL2 - Filtrex Ecocarb GreenBlock CL2 - 10 Mircon Carbon Block Culligan Compatible Filter

Product Code FXCUL12CL2

$9.74
per 
Shipping calculated at checkout.

This Filtrex FXCUL12CL2 Water Filter is a 12 inch carbon water filter cartridge used for the reduction of the bad taste and odor of chlorine as well as dirt, sediment, rust, sand, silt, and other impurities down to the 10 micron level. It is compatible for use in various reverse osmosis systems which use 12" length x 2" width carbon prefilters including the Culligan Aqua Cleer (AC) as well as Culligan H Series reverse osmosis systems such as the Culligan H-5, Culligan H-8, Culligan H-82, and Culligan H-83 plus other RO systems including the AC-15, AC-30, AC-50, LC-50, and more. This Filtrex RO filter is a compatible replacement filter for the SC1216110, S7011-C, and S7025-C, and other identical 12"L x 2"W RO pre-filters.

The Filtrex FXCUL12CL2 is one of many eco friendly filters from the CL2 Series of GreenBlock filters from Filtrex - these high performance coconut shell carbon block water filter cartridges are manufactured using a unique process that reduces harmful green house gas emissions.

This Filtrex carbon block filter cartridge is made from high performance coconut shell activated carbon which features a unique carbon binder system plus more micro pores compared to other types of carbon filters. Filtrex carbon filters have a very low pressure drop, high dirt holding capacity, and advanced contaminant reduction due to more carbon surface area in the filter. No carbon fines are released during filtration. FXCL2 filters can be used as a prefilter for a wide range of reverse osmosis systems which are compatible with a 12" length X 2" width carbon filter cartridge. With durable polypropylene end caps and inner/outer wrapping along with a polyethylene netting, these filters are designed to last.

Filtrex FXCUL12CL2 Carbon Water Filter Specifications:

    Pressure: 1.6 PSI
    Micron Rating: 10 microns
    Temperature Range: 40 - 180 F
    Filter Media: Coconut carbon block
    Exact Dimensions: 11 3/4" length x 1.9" width
    Filter Life: About 3-6 months depending on frequency of use
    Flow Rate: 1 GPM @ 1.6 PSI (may vary depending on specific RO system)

This filter is NSF Certified to Standard 42 for Material Safety and is also manufactured from NSF Standard 61 Certified coconut shell carbon. Additionally, it is NSF / WQA Gold Seal Listed.