Jaco
Jaco - Reducing Union Fitting with Ferrule Nut and Integral Sleeve - Polypropylene
$2.09
Shipping calculated at checkout.
Reducing Union Fitting with Ferrule Nut with integral sleeve low pressure applications soft plastic tubing 50 PSI
- Polypropylene has good chemical resistance
- Polypropylene pressure: 1/8"-1/2" 50 psi & 5/8" & up 220 psi
- Temperature range: -30°F to 215°F (PP)
- Polypropylene is NSF 61 listed
| National Pipe Thread (NPT) Size Measured Against a Ruler* | |
|
Actual Diameter (Inches) |
National Pipe Thread (NPT) (Fractional) |
| 0.405" | 1/8" |
| 0.540" | 1/4" |
| 0.675" | 3/8" |
| 0.840" | 1/2" |
*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.
** For high pressure needs, add a gripper to increase pressure grip to 220 PSI