Sensafe
Sensafe (481234) Ozone Check; Bottle 50 Test Strips
$29.99
Shipping calculated at checkout.
SenSafe Ozone Check for water quality testing is a unique test strip that is designed to test for levels of Ozone in water. Reporting levels at 0, 0.05, 0.1, 0.2, 0.3, 0.4, > 0.5 ppm (mg/L), SenSafe Ozone Check gives you accurate results in only 30 seconds. The low detection ability with this strip is possible because of the unique aperture feature.
The test procedure is as follows: Dip one test strip into a 50mL or larger water sample with constant, gentle back-and-forth motion for 10 seconds. Remove the strip, shake once, briskly, to remove excess water and wait 20 seconds. Then, view through the aperture to match with the closest color. The simple dip-and-read procedure makes testing easy, as no technical experience is required to run the test. Low-range and expanded range versions of the SenSafe Ozone Check are also available.
The test procedure is as follows: Dip one test strip into a 50mL or larger water sample with constant, gentle back-and-forth motion for 10 seconds. Remove the strip, shake once, briskly, to remove excess water and wait 20 seconds. Then, view through the aperture to match with the closest color. The simple dip-and-read procedure makes testing easy, as no technical experience is required to run the test. Low-range and expanded range versions of the SenSafe Ozone Check are also available.
- Number of Tests: Bottle of 50
- Sensitivity: 0, 0.05, 0.1, 0.2, 0.3, 0.4, > 0.5 ppm (mg/L)
- Total Test Time: 30 Seconds