|
Our RO/DI units are for Reef/Aquarium enthusiasts who require only the purest of water and when reverse osmosis is not enough. Reverse osmosis removes a large majority of TDS (total dissolved solids) but not enough of it. TDS is can be lowered to extremely low levels by using a DI (deionization) filter. With our systems, you will typically get ZERO to near ZERO TDS readings!!!
Do you know how clean tap water is? Water that comes out of each faucet that is left untreated contains contaminants that cause bad taste and odor. Contaminants such as:
- Sodium
- Aluminum
- Lead
- Copper
- Mercury
- Calcium
- Iron
- Chloride
- Manganese
- And much more…
Isopure Water offers a collection of systems that can improve the quality of water in your home or business. Save some time and money with our Reverse Osmosis/Deionization system by making ultra-pure water right at your own sink.
Portability
Isopure Water’s Reverse Osmosis/De-Ionizing System is designed to be conveniently moved from one location to another. Weighing at less than 30 pounds, you can hook it up, obtain the amount of water you need and store it out of the way for later use.
99.9% Contaminants Removal/Reduction
The RO does most of the work removing up to 97% of contaminants. A DI filter is used as a polishing filter to finish the work by removing the remaining making it 99.9% effective in removing unwanted substances commonly found in tap water. The TDS (total dissolved solids) are reported to drop to ZERO or near ZERO TDS LEVELS.
How It Works
Reverse Osmosis: First, you would need to know what a normal osmosis is. According to the Merriam-Webster Dictionary, Osmosis the natural process which occurs when water flows from a purer solution through a semi permeable membrane into a more concentrated solution. Reverse Osmosis, on the other hand is a mechanical process that uses water pressure to force concentrated solutions, water, to flow to a more purified water source.
Deionization:
DI stands for deionization or demineralization. DI filtration is used when there is a need for ultra-pure water or non-electrical current water. DI resin contains a mixture of beads that are positively and negatively charged. These beads attach themselves to any charged ion and then release hydrogen ions or hydroxide ions in return. The product water is then considered deionized. It is best to use these DI filters as a post filter to reverse osmosis to maximize the life of the DI resin.
How Substances Are Separated by a Membrane
Reverse Osmosis/De-Ionizing uses a semi-permeable membrane that allows fluid that is being purified pass through while it rejects the remaining contaminants down the drain. It is always a 1:4 ratio. For every 1 gallon product water, there is 4 gallons of waste water.
Includes
- High Rejection Filmtec 75 GPD membrane:
- One of the highest quality membranes available for RO/DI systems.
- Pre-Assembled
- The system is already put together so all you have to do is hook it up and you are good to go.
- Color Coded Tubing
- Makes set up so much easier than it already is!
- Manual Flush Flow Restrictor
- Controls waste water amount, supplying the right amount of pressure against the membrane to maintain its effectiveness. This feature also allows the system to have an extended life.
- Check Valve
- This feature reduces waste water by preventing pressure from pushing water through the membrane and down the drain.
- Clear Housings
- Easy way to monitor your system and its filters. With clear housings, you are able to tell when the filters need to be changed.
- Mounting Bracket
- This will allow you to increase your installation process.
- Standard Size Filters
- 2.5” X 10” standard filters that is available in most hardware stores.
- Chrome Feed Adapater
- Drain valve
Specifications:
- Weight: 15 lbs
- Dimensions: 16" height x 16" width" x 5.5" depth
|
