ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Unicel

Unicel (T-0797-50-B) 9.75"x2.75" Pleated Polyester 4 Sq. Ft 50 Micron Filter

Product Code T-0797-50-B

$6.99

Unicel Flow-Max Series

T-0797-50-B 10" x 2.5" Pleated Polyester Sediment Filter

50 micron pleated polyester cartridge with 4 square feet of filtration surface. Cleanable, reusable, and built for extended service life in standard 10-inch housings.

50 Micron 4 Sq Ft Surface Cleanable & Reusable
WHY IT WORKS

Pleated Design Outperforms Conventional Sediment Cartridges

📐

Pleated Construction

4 square feet of 100% synthetic polyester media in a 10" x 2.5" cartridge. Greater surface area means lower pressure drop and longer service intervals than wound or spun alternatives.

🔬

50 Micron Particle Retention

Captures sediment, rust, sand, and silt down to 50 microns. Effective first-stage filtration that protects downstream carbon blocks, membranes, and appliances from premature clogging.

♻️

Cleanable & Reusable

Synthetic polyester media can be rinsed and reused multiple times. No cellulose, no binders, no additives that degrade or cause foaming. Bacteria resistant and chemical stable.

🦠

Cyst Reduction

Pleated structure is ideal for reducing Cryptosporidium and Giardia cysts up to 99.9%. Reliable protection for whole-house and point-of-entry applications where biological contamination is a concern.

SPECIFICATIONS

Cartridge Details

Model Number Unicel T-0797-50-B
Dimensions 9.75" length x 2.75" outer diameter
Micron Rating 50 micron nominal
Filter Media 100% pleated polyester (cellulose-free)
Surface Area 4 square feet
End Caps Standard 10" closed-end configuration
COMPATIBILITY

Fits Standard 10-Inch Filter Housings

The Unicel T-0797-50-B fits any standard 10-inch by 2.5-inch filter housing used in whole-house filtration systems, RO pre-filtration, well water treatment, and point-of-entry sediment applications. Compatible with housings from major manufacturers including Pentek, Culligan, Omnifilter, and GE.

MAINTENANCE

Replacement and Cleaning Schedule

Every 3–6 Months

Inspect and Clean

Remove cartridge and rinse under running water to dislodge accumulated sediment. Can be cleaned multiple times before replacement is required, depending on sediment load.

Every 12–18 Months

Replace Cartridge

Replace when cleaning no longer restores flow rate or when visible media degradation occurs. Service life depends on water quality and usage volume.

🛡️

Extended Filter Life

Pleated design and cleanable media reduce replacement frequency and total cost of ownership

💧

Low Pressure Drop

4 square feet of surface area maintains flow rate even as sediment accumulates

🔧

Universal Fit

Drops into any standard 10" x 2.5" housing without adapters or modifications

🌱

Chemical-Free Media

No binders, adhesives, or additives that leach into filtered water or cause foaming issues



Added to Cart!

Customers who buy this also get…

💧
Just Added
✦ AI Picks Suggested for your system

Finding the best pairings for your system…

Items added to cart!

Taking you there now…