Omnipure
Omnipure - K5586 - 10" x 2.5" GAC With Phosphate Inline Filter
$22.75
Shipping calculated at checkout.
The Omnipure K-Series K5586 inline filter is a phosphate GAC inline filter. This filter comes in 1/4 FPT, 1/4 QC, and 3/8" QC fittings. This filter can be used in ice makers, refrigerators, beverage equipment, drinking fountains, under the counter systems, R.O. Systems and in conjunction with purification systems. This filter aids in the removal of taste, odor and chlorine taste and odor along with a polyphosphate scale inhibitor.
*NOTE: A very common misconception is that a 1/4" NPT measures as 1/4 inch on a ruler or tape measurer. However, that is not the case. NPT will measure larger in diameter. Above is a sizing reference to help clarify.
- Dimensions: 2.5" W X 10" L
- Flow Rate: .5 GPM
- Maximum Pressure: 125 PSI
- Maximum Temperature: 100 F
- Service Life: 6 Months or 1500 Gallons
- Filtration Media: Granulated Activated Carbon with Polyphosphate Scale Inhibitor
- Reduces: Chlorine Taste & Odor
- Reduces: Particulates Class 1
- Reduces: Scale and Lime Scale
- Volume Cubic Inch: 28.6
- Fitting Size: 1/4" FPT, 1/4" QC, and 3/8" QC
- Omnipure K5586-BB has been tested for performance under NSF Standard 42.
| National Pipe Thread (NPT) Size Measured Against a Ruler* | |
|
 Actual Diameter (Inches) |
National Pipe Thread (NPT) (Fractional) |
| 0.405" | 1/8" |
| 0.540" | 1/4" |
| 0.675" | 3/8" |
| 0.840" | 1/2" |