The Myron L pH 10 Calibration Buffer Solution delivers laboratory-grade accuracy for precise pH meter calibration, certified to within ±0.01 pH units at 25°C. This NIST-traceable, mold-inhibited buffer ensures your water quality testing equipment maintains measurement integrity across industrial, commercial, and laboratory applications.
SPECIFICATIONS
Technical Details
| Manufacturer | Myron L Company |
| Buffer pH Value | 10.0 ±0.01 pH units @ 25°C |
| Certification | NIST-traceable pH reference |
| Formulation | Mold-inhibited solution |
| Color Code | Coded for instant identification |
| Application | pH meter calibration |
| Accuracy Temperature | 25°C (77°F) |
| Compatible With | Myron L meters and standard pH electrodes |
INSTALLATION & USE
Calibration Procedure
- Rinse the pH electrode with distilled or deionized water and gently blot dry with a lint-free tissue.
- Pour fresh Myron L pH 10 buffer solution into a clean calibration cup, ensuring the electrode junction and sensing bulb are fully immersed.
- Allow the reading to stabilize at 25°C, then adjust your meter to read 10.0 pH according to manufacturer instructions.
- Rinse the electrode thoroughly with distilled water before proceeding to sample measurement or storage.
COMPATIBILITY
Equipment Applications
The Myron L pH 10 Calibration Buffer Solution is compatible with all Myron L water quality meters and standard glass or combination pH electrodes. Use in conjunction with pH 4 and pH 7 buffers for two- or three-point calibration procedures across the full pH measurement range. Ideal for calibrating instruments used in reverse osmosis monitoring, aquaculture systems, cooling tower management, boiler feedwater analysis, and general water quality testing.
🔧 Always calibrate with fresh buffer solution poured from the bottle—never return used buffer back into the container, as contamination degrades accuracy over time.
