ADDRESS: 515 N. Fairview St, Santa Ana, CA 92703 | PHONE: (714) 541-6600 | SHOP NOW

Watts

Compatible to Intelifil (IF-SM-AA020) 20"x2.5" 12,000 mg-L Activated Alumina Fluoride Removal Filter by IPW Industries Inc

Product Code IF-SM-AA020

$73.49
per 
Shipping calculated at checkout.

Highly Fluorinated water may be dangerous to your health. Drinking water with fluoride levels above 2 mg/L can lead to mottling of the teeth. Ongoing levels above 4 mg/L can result in serious health problems.

Although the main purpose of this filter is to remove fluoride, Activated Alumina can remove many other contaminants.

Reduces/Removes:

  • Fluoride
  • Hydrogen Chloride
  • Hydrogen Sulfide
  • Carbonyl Sulfide
  • Carbon Dioxide
  • Inorganic Arsenic
  • Alcohols
  • Ethers

Specifications:

  • Micron Rating: 10 Micron
  • Dimensions: 20" x 2.5"
  • Design Flow Rate: .25 GPM
  • Weight: 2 lbs 4 oz
  • Operation Temperature: 40°F to 100°F
  • Filter Media: Activated Alumina
  • Filter Life: 12,000 mg/L or 701 GPG

Operating Conditions:

For maximum effectiveness, do not exceed the recommended flow rate of .25 GPM. This filter lasts for 12,000 mg/l (ppm) with effluent levels below 0.2 ppm from 10 ppm feed (approximately 2750 gallons). Note: high pH and high bicarbonate levels reduce the capacity - above 100 ppm bicarbonate, reduce by 50%; above 200 ppm, reduce by 75%.

Interfering ions and the recommended flow rates must be specifically accounted for when sizing these cartridges.