Phone : (877) 541-6603  •  Direct : (714) 541-6600
Hello Guest, Log in!
0 item(s)
GE Osmonics (94766) Hytrex 9-7/8"x2.5" GX01-9 7/8 Spun Polypropylene Depth Sediment 1 Micron Filter

GE Osmonics (94766) Hytrex 9-7/8"x2.5" GX01-9 7/8 Spun Polypropylene Depth Sediment 1 Micron Filter

Your Price: $5.39
Ships within 24-72 Hours
Part Number:94766
Quantity Pricing
  • 10 - 24
  • $5.12
  • 25 - 39
  • $4.85
  • 40+
  • $4.31

Features and Benefits
The Hytrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Hytrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Hytrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string wound or resin-bonded filters.

Hytrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.


  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine filtration
  • Meets FDA compliance for food and beverage contact

Materials of Construction

  • Filtration Media : Polypropylene
  • End caps and Adapters : Polypropylene


  • Nominal O.D. - 2.50" (6.4 cm)
  • Nominal I.D. -1" (2.5 cm)
  • Length - 9-7/8"

Additional Information 
Hytrex Depth cartridge filters are made from thermally bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA complain sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

Other Items You May Be Interested In