GE Desal (1206740) AG3308T; 3.3'' X 8'' TFC; (10'' AMETEK) Brackish Water 320 GPD RO Membrane

Description
Related Info.

The A-Series, family of proprietary thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection. AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig (1,379 kPa) are desired. These elements allow moderate energy savings, and are considered a standard in the industry. AG3308T High Rejection Brackish Water elements feature a tape outer wrap and 28 mil feed spacers. This element is designed with flush end connections.

Element Specifications

Model	Flow	Avg. Rejection	Min. Rejection	Part Number
AG3308T	320 GPD (1.2 m3/d)	99.5%	99%	1206740

Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH 7.5 after 24 hours. Individual flux may vary +25%/ -15%.

Operating and Design Parameters

Membrane:	Thin Film Membrane (TFM®)
Typical Operating Pressure:	200 psig (1,379 kPa)
Maximum Pressure:	450 psig (3,103 kPa)
Maximum Temperature:	122°F (50°C)
Chlorine Tolerance:	1,000 ppm-hrs, dechlorination recommended
Optimum Rejection pH:	7.0 -7.5
Operating pH Range:	4.0 - 11.0
Cleaning pH Range:	2.0 - 11.5
Feed NTU:	<1
Feed SDI:	<3
Typical Operating Flux:	10-20 GFD (15-35) L.H-1.M-2

GE Desal (1206740) AG3308T; 3.3" X 8" TFC; (10" AMETEK) Brackish Water 320 GPD RO Membrane