My Account    |     0 ITEM(S) IN CART    CHECKOUT
Call Us Phone Number  Toll Free: 1 (877) 541-6603
Open 9 AM - 5 PM PST Mon-Fri
Follow Us:
Social Media Pages for Isopure Water on Facebook, Twitter, Yelp and Google Plus Isopure Water Facebook PageTweet us on Isopure Water Twitter PageGoogle Plus Circle for Isopure Water for Water Filtration NewsFind Isopure Water on Yelp!

$5.99 Flat Rate Ground Shipping

Members of the Water Quality Association

Fleck (F5600SE) 5600 SXT 5 Cycle, Softener Meter Valve, 24 Volts, #1 Injector, No DLFC

Fleck (F5600SE) 5600 SXT 5 Cycle, Softener Meter Valve, 24 Volts, #1 Injector, No DLFC
Your Price:$299.00
Retail Price:$446.00
Your Savings:$147.00(33%)
Ships within 24-72 Hours
Part Number:K4014SE
Choose Options


  • Simple mechanical design is easy to understand
  • Two valve body designs: one for down flow regeneration and one for up flow (covers every valve in the 5600 family - quick access to all internal components)
  • Injector/drain modules containing the brine valve, flow controls and injector are removable from the valve's exterior
  • Ruggedly built timer is designed with heavy-duty 3/8"  wide plastic gears
  • 5600 controls are user friendly and easy to program
  • Non-corrosive, UV-resistant fiber-reinforced polymer valve body
  • On Demand regeneration with digital meter
  • Economical - small annual power consumption; keeps the time and activates the piston/valve mechanics with a single motor
  • Designed with double backwash

Valve Specifications

Valve materialFiber-reinforced polymer
Inlet/Outlet3/4 , 1 , 1-1/4 

Flow Rates (50 psi Inlet) - Valve Alone

Continuous (15 psi drop)20 GPM
Peak (25 psi drop)26 GPM
CV (flow at 1 psi drop)5.0
Max. backwash (25 psi drop)7 GPM


Down flow/Up flowBoth
Adjustable cyclesBrine fill only
Time available180 minutes/regen

Meter Information

Meter accuracy range.25 - 15 GPM +/- 5%
Meter capacity range (gal.)Standard: 125 - 2,125
Extended: 625 - 10,625


Distributor pilot0.8125  or 1.050  pipe O.D.
Drain line1/2  NPTF
Brine line1600 - 3/8 
Mounting base2-1/2  - 8 NPSM
Height from top of tank7 

Typical Applications

Water softener6 -12  diameter
Iron filter6 -10  diameter
Sediment filter6 -10  diameter
Carbon filter6 -10  diameter
Neutralizing filter6 -10  diameter

Additional Information

Injector brine system1600
Electrical rating 24v with a 110 v 60 Hz transformer
Max. VA3
Estimated shipping weight Metered valve: 6 lbs.
PressureHydrostatic: 300 psi
Working: 20 - 125 psi
Temperature34° - 110° F

* DLFC (Drain Line Flow Control) is not included.

Below are suggestions for the DLFC to be used in each size. Although it may vary, please keep in mind it is a suggestion.

DLFC Button Tank Size
1.2 GPM 8" x 44"
1.5 GPM 9" x 48"
2.0 GPM 9" x 48"
2.4 GPM 10" x 54"
3.0 GPM 12" x 52"
3.5 GPM 13" x 54"
4.0 GPM 13" x 54"
5.0 GPM 14" x 65"
5 Stars
Excellent Valve
This is the replacement valve for the F5600SE. You will need a straight drain tube nipple for this valve and you will need you use the strainer from your old valve, but other than that, it's an easy install and this valve works much better than the F5600SE. I am very pleased with it!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Bossier City, LA. on 7/11/2014
5 Stars
Home owner DIY
This item was easy to install and to set up. After a little research I found that it was the new upgrade for the old model that I had the 5600se. I've been using it for about two months and haven't had to do anything to it after the initial set up.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Safford az 85546. on 4/19/2014
5 Stars
Very easy to install and program. Is working perfectly
Did you find this helpful? 
Reviewed by:  from Sanford Florida. on 4/19/2016
free business advertising  free business advertising