Phone : (877) 541-6603  •  Direct : (714) 541-6600   support@isopurewater.com
Hello Guest, Log in!
0 item(s)
Fleck (F5600M-CSA) 5600 5 Cycle, Standard Softener Meter Valve, #1 Injector, No DLFC

Fleck (F5600M-CSA) 5600 5 Cycle, Standard Softener Meter Valve, #1 Injector, No DLFC

review
5
0
5
Your Price: $264.99
Retail Price:$444.51
Your Savings:$179.52(40%)
Ships within 24-72 hours
Part Number:F5600M-CSA

Choose Options

DLFC

Features

  • Simple mechanical design is easy to understand
  • Two valve body designs: one for down flow regeneration and one for up flow (covers every valve in the 5600 family - quick access to all internal components)
  • Injector/drain modules containing the brine valve, flow controls and injector are removable from the valve's exterior
  • Ruggedly built timer is designed with heavy-duty 3/8"  wide plastic gears
  • 5600 controls are user friendly and easy to program
  • Non-corrosive, UV-resistant fiber-reinforced polymer valve body
  • On Demand regeneration with a mechanical meter
  • Economical - small annual power consumption; keeps the time and activates the piston/valve mechanics with a single motor
  • Designed with double backwash

Valve Specifications

Valve materialFiber-reinforced polymer
Inlet/Outlet3/4 , 1 , 1-1/4 
Cycles7

Flow Rates (50 psi Inlet) - Valve Alone

Continuous (15 psi drop)20 GPM
Peak (25 psi drop)26 GPM
CV (flow at 1 psi drop)5.0
Max. backwash (25 psi drop)7 GPM

Regeneration

Down flow/Up flowBoth
Adjustable cyclesBrine fill only
Time available180 minutes/regen

Meter Information

Meter accuracy range.25 - 15 GPM +/- 5%
Meter capacity range (gal.)Standard: 125 - 2,125
Extended: 625 - 10,625

Dimensions

Distributor pilot0.8125  or 1.050  pipe O.D.
Drain line1/2  NPTF
Brine line1600 - 3/8 
Mounting base2-1/2  - 8 NPSM
Height from top of tank7 

Typical Applications

Water softener6 -12  diameter
Iron filter6 -10  diameter
Sediment filter6 -10  diameter
Carbon filter6 -10  diameter
Neutralizing filter6 -10  diameter

Additional Information

Injector brine system1600
Electrical rating 110 v 60 Hz
Max. VA3
Estimated shipping weight Metered valve: 6 lbs.
PressureHydrostatic: 300 psi
Working: 20 - 125 psi
Temperature34° - 110° F

* DLFC (Drain Line Flow Control) is not included.

Below are suggestions for the DLFC to be used in each size. Although it may vary, please keep in mind it is a suggestion.

DLFC Button Tank Size
1.2 GPM 8" x 44"
1.5 GPM 9" x 48"
2.0 GPM 9" x 48"
2.4 GPM 10" x 54"
3.0 GPM 12" x 52"
3.5 GPM 13" x 54"
4.0 GPM 13" x 54"
5.0 GPM 14" x 65"
5 Stars
PLUMBER
THE FLECK HEAD IS THE BEST SOFTENER METERED HEAD AROUND I HAVE BEEN USING THEM FOR 20 YEARS. SET IT UP AND FORGET ABOUT THEM. THEY ONLY NEED REPLACING WHEN A ROCK OR TRASH GETS STUCK INSIDE OF THEM. WHICH IS VERY RARE. THANKS ISOPURE WATER FOR YOUR FAST SERVICE
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from DEL RIO, TX. on 4/10/2015
5
5 Stars
Contractor
I really like this product, easy to install, and works well last a long time.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from Lake worth FL. on 6/13/2015
5
5 Stars
Rental Owner
This is a easy to install controller. I had no problems but need to seek out a reducer fitting to attach to the discharge line to accommodate the smaller line to the tank. I plan to convert some other time-charge controllers to this unit.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Lincoln NE. on 2/13/2014
5
5 Stars
Consumer
WOW ! ! My 5600 meter valve has been in service from 1987 without repair. I was going to have it re bedded with new mineral and Plan to replace the still working like new Control Valve next month as I believe that the mineral has been depleted over the last 29 years 8-))) of continual reliable use 8-) The old valve is so faded and brittle now that it's just time for that.
Did you find this helpful? 
Reviewed by:  from Palm Bay, FL . on 8/22/2016
5

Other Items You May Be Interested In