Water Filter, Reverse Osmosis System, Reverse Osmosis Pressure Tank, Water Filtration Systems
Toll Free: 877-541-6603
Open 9 AM - 5 PM PST Mon-Fri
Quick Order

If you already know your part numbers, simply enter them below along with the quantity desired and click Add to Cart for a speedy check-out.

Enter Part Number:Qty.

Newsletter Signup

Join our newsletter list to get the latest updates


Contact Us

TOLL FREE: 877-541-6603


Home > Parts & Filter Components > Faucets > Everpure Faucets

Everpure (EV900085) Dual Temperature Designer Series Drinking Water Faucet; Polished Stainless Steel

Everpure (EV900085) Dual Temperature Designer Series Drinking Water Faucet; Polished Stainless Steel


Retail Price:: $600.00

Your Savings:: $150.00

Your Price: $450.00


Availability: Will ship within 24-72 hours.

Choose Options


Dual Temp Series
Everpure series dual temperature hot/cold drinking water faucets deliver cold or ambient filtered water and near boiling instant hot water from a single spout. Exclusively designed to be used with the Everpure Commercial Grade Instant Hot Water Dispenser (Solaria™) and other vented instant hot systems, these faucets are equipped with a built-in safety feature with spring loaded shut off to prevent accidents. The cold side may be connected to the Everpure Commercial Grade Water Chiller (Polaria™) for refreshingly chilled drinking water or just simply enjoy ambient fi ltered water from any Everpure Drinking Water System. The Everpure Dual Temperature faucet features solid stainless steel construction and is available in two beautiful fi nishes, Polished Stainless and Brushed Stainless. They are lead-free and feature a ceramic disc type valve for smooth functionality and lasting durability. Blue and red indicators on the handles distinguish hot and cold sides.

Everpure Hot/Cold Drinking Water Faucets feature:
  • Sleek, dual handle design
  • Selection of two beautiful fi nishes to match the most popular designer faucets
  • Spring loaded “hot” shut off valve safety feature
  • Insulated heat-resistant spout
  • Exclusively designed to be used with vented instant hot systems
  • Lead-free
  • Aerator tip provides even, clear stream of fi ltered water
  • RO compatible with the use of a separate air gap
  • Flow Rate: 0.5 gal/min (1.9 L/min)
  • Operating Pressure: 20-90 psi (1.38-6.21 bar)
  • Temperature Range: 50-212°F (10-100°C)
  • Installation: 1" or standard sink hole installation
  • Warranty: This faucet is warrant to be free and clear of defect and workmanship defect for 5 years. The coated finish is warranted for 3 years. After 3 years, depending on local water conditions and/or cleaning agents used, the coating may not be as bright as new. For general cleaning, use a soft damp cloth. The use of cleaning chemicals is not recommended.